Power: 1150 W RPM: 1 50-250/min, 2 100-450/min Spindle: MK2 - 19 mm (3/4") Weldon Stroke: 150mm Weight: 13 kg Magnet power: 1700 kg Max hole cutter Ø mm 50 Max twist drills Ø mm 23 Max thread M5-M20
Motor power: 1080 WattSpindle: 19 mm (3/4") WeldonHole cutter / annular cutter short: Ø 36 mm (1-7/16")RPM: 400 min-1Stroke: 39 mm (1.54")Weight: 11 Kgs (24.2 Lbs)Magnet power: 1200 kgs (2640 Lbs)
Motor power: 1800 WattSpindle: Morse taper 3 - 19 mm (3/4") WeldonHole cutter / annular cutter short (30 mm): Ø 100 mm Hole cutter / annular cutter long (55 mm): Ø 100 mm Hole cutter / annular cutter extra long (110 mm): Ø 50 mm Countersink: Ø 50 mm Reaming: Ø 31.75 mm (Twist drills: Ø 31.75 mm Tapping: M30RPM: I 40-140 min-1 - II 120-480 min-1Stroke: 250...
Specially for stainless steel we recommend to use another type of FCO cutting oil, the FCO S. This FCO S oil is general cutting oil for processing stainless steel and other very hard materials with high tensile strength. The mainly different between the FCO and FCO S is the sulfur additives in the FCO S.
When you have to work in inverted postion with your machine or when you have to work on the hardest materials, we advise you the FCP ( Fe Powertools Cutting paste). This paste is very adhesive and does not leak down like oil. It will ensure you better cutting and cooling. Another advantage of this paste is that the paste does not leave a grease stain on...
Powerfull gripJaws with step and prism for clamping of flat and round material Fine-adjustment in longitudinal movement by an adjusting screw accurately set to the machining point
For FE 30, 32, 32 R/L, 50 and 50 R/L (For pipes: 80 - 250 mm)Easy cutting holes in pipes and tubes
For FE 100 R/L (For pipes 150-500 mm) Easy cutting holes in pipes and tubes
FECD 003 is a vacuum plate which can be used to to give your magnetic drilling machine a stabile underground non-magnetic materials. The FECD 003 is especially suitable for canneled plates. Delivery contains vacuum plate and high-performance vacuum pump Dimensions: diam. 300 mm
FECD 004 is an oval vacuum plate with 2 suction surfaces which can be used to give your magnetic drilling machine a stabile underground on non-magnetic materials. The FECD 004 is especially suitable for smooth surfaces. Delivery contains a vacuum plate and high-performance vacuum pump.Dimensions: 440x260 mm | hole 50x120 mm